This IBM Redbooks® publication covers IBM TS7700 R5.3. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 25 years of experience, the R5.3 release includes many features that enable improved performance, usability, and security. Highlights include the IBM TS7700 Advanced Object Store, an all flash TS7770, grid resiliency enhancements, and Logical WORM retention. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud Object Storage, Amazon S3, and RSTOR. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.3. The R5.3 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000 Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.3 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. TS7700 provides tape virtualization for the IBM Z® environment. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. New and existing capabilities of the TS7700 5.3 release includes the following highlights: Support for IBM TS1160 Tape Drives and JE/JM media Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication of virtual tape and TCT objects Grid access to all logical volume and object data independent of where it resides An all flash TS7770 option for improved performance Full Advanced Object Store Grid Cloud support of DS8000 Transparent Cloud Tier Full AES256 encryption for data that is in-flight and at-rest Tight integration with IBM Z and DFSMS policy management DS8000 Object Store with AES256 in-flight encryption and compression Regulatory compliance through Logical WORM and LWORM Retention support Cloud Storage Tier support for archive, logical volume versions, and disaster recovery Optional integration with physical tape 16 Gb IBM FICON® throughput that exceeds 4 GBps per TS7700 cluster Grid Resiliency Support with Control Unit Initiated Reconfiguration (CUIR) support IBM Z hosts view up to 3,968 3490 devices per TS7700 grid TS7770 Cache On Demand feature that uses capacity-based licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1160, IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM Power9® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

This IBM® Redbooks® publication covers IBM TS7700 R5.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on 25 years of experience, the R5.2 release includes many features that enable improved performance, usability, and security. Highlights include IBM TS7700 Advanced Object Store, an all flash TS7770, grid resiliency enhancements, and Logical WORM retention. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage, Amazon S3, and RSTOR. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.2. The R5.2 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.2 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. Note: The latest Release 5.2 was split into two phases: R5.2 Phase 1 (also referred to as and ) R5.2 Phase 2 ( and R) TS7700 provides tape virtualization for the IBM z environment. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. Tape virtualization can help satisfy the following requirements in a data processing environment. New and existing capabilities of the TS7700 5.2.2 release includes the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication of virtual tape and TCT objects Grid access to all logical volume and object data that is independent of where it exists An all-flash TS7770 option for improved performance Full Advanced Object Store Grid Cloud support of DS8000 Transparent Cloud Tier Full AES256 encryption for data that is in-flight and at-rest Tight integration with IBM Z® and DFSMS policy management DS8000 Object Store AES256 in-flight encryption and compression Regulatory compliance through Logical WORM and LWORM Retention support Cloud Storage Tier support for archive, logical volume version, and disaster recovery Optional integration with physical tape 16 Gb IBM FICON® throughput that exceeds 5 GBps per TS7700 cluster Grid Resiliency Support with Control Unit Initiated Reconfiguration (CUIR) support IBM Z hosts view up to 3,968 common devices per TS7700 grid TS7770 Cache On-demand feature that is based capacity licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1160, IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM POWER9™ technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

This IBM® Redbooks® publication covers IBM TS7700 R5.1. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7770 supports the ability to store virtual tape volumes in an object store. The TS7700 supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage and Amazon S3. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.1. The R5.1 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.1 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. TS7700 provides tape virtualization for the IBM z environment. Tape virtualization can help satisfy the following requirements in a data processing environment: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape Increased efficient procedures for managing daily batch, backup, recall, and restore processing On-premises and off-premises object store cloud storage support as an alternative to physical tape for archive and disaster recovery New and existing capabilities of the TS7700 5.1 include the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication Full AES256 encryption for replication data that is in-flight and at-rest Tight integration with IBM Z and DFSMS policy management Optional target for DS8000 Transparent Cloud Tier using DFSMS DS8000 Object Store AES256 in-flight encryption and compression Optional Cloud Storage Tier support for archive and disaster recovery 16 Gb IBM FICON® throughput up to 5 GBps per TS7700 cluster IBM Z hosts view up to 3,968 common devices per TS7700 grid Grid access to all data independent of where it exists TS7770 Cache On-demand feature that is based capacity licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM POWER9™ technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

This IBM® Redbooks® publication covers IBM TS7700 R4.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. The TS7700 has supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. Using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Given object storage is cloud based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of the release of this document, the TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3. To learn about the TS7760 cloud storage tier function, planning, implementation, best practices, and support see IBM Redpaper IBM TS7760 R4.2 Cloud Storage Tier Guide, redp-5514 at: http://www.redbooks.ibm.com/abstracts/redp5514.html The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape More efficient procedures for managing daily backup and restore processing Infrastructure simplification through reduction of the number of physical tape libraries, drives, and media TS7700 delivers the following new capabilities: TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3 8-way Grid Cloud consisting of any generation of TS7700 Synchronous and asynchronous replication Tight integration with IBM Z and DFSMS policy management Optional Transparent Cloud Tiering Optional integration with physical tape Cumulative 16Gb FICON throughput up to 4.8GB/s 8 IBM Z hosts view up to 496 8 equivalent devices Grid access to all data independent of where it exists The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

Abstract This IBM® Redbooks® publication covers IBM TS7700 R4.1 through R4.1.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. This publication explains the all-new hardware that is introduced with IBM TS7700 release R4.1 and the concepts associated with it. TS7700 R4.1 can be installed only on the IBM TS7720, TS7740, and the all-new, hardware-refreshed TS7760 Models. The IBM TS7720T and TS7760T (tape attach) partition mimics the behavior of the previous TS7740, but with higher performance and capacity. The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Redundant copies, including across a grid network Copy mode control TS7700 delivers the following new capabilities: 7 and 8 way Grid support through approved request for price quotation 16 Gb FICON adapter support for TS7760 (R4.1.2) Optimized host data compression which is based on software (not FICON adapter hardware) compression algorithm (R4.1.2) Control-unit initiated reconfiguration (CUIR) for code load improvement (R4.1.2)[ Grid Resiliency Improvements (R4.1.2) System Events Redesign (R4.1.2) Remote System Log Processing Support in (R4.1.2) Improvements to reliability, availability, and serviceability The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

This IBM® Redbooks® publication highlights IBM TS7700 Release 4.0. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM z™ Systems environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Redundant copies, including across a grid network Copy mode control The IBM TS7700 offers enhanced statistical reporting. It also includes a standards-based Management Interface (MI) for IBM TS7700 management. IBM TS7700 R4.0 continues the next generation of IBM TS7700 for z Systems® tape: The IBM TS7760 is an all new hardware refresh and features Encryption Capable, high-capacity cache that uses 4 TB serial-attached Small Computer System Interface (SAS) HDDs in arrays that use dynamic disk pool configuration. This setup can scale to large capacities with the highest level of data protection. Release 4.0 introduces the option to attach to a TS4500 tape library, and to the previous TS3500 tape library, which contains back-end physical tape drives and policies to manage up to eight of the disk repositories in a tape-attached TS7760T. This TS7760T (Tape Attached) configuration mimics the behavior of a TS7740, with additional features that go beyond what a TS7740 can provide. The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most z Systems tape workloads when compared to the previous generations of IBM TS7700.

IBM® TS7700 is a family of mainframe virtual tape solutions that optimize data protection and business continuance for IBM z Systems™ data. Through the use of virtualization and disk cache, the TS7700 family operates at disk speeds while maintaining compatibility with existing tape operations. Its fully integrated tiered storage hierarchy takes advantage of both disk and tape technologies to deliver performance for active data and best economics for inactive and archive data. This IBM Redbooks® publication describes the TS7700 R3.3 architecture, planning, migration, implementation, and operations. The latest TS7700 family of z Systems tape virtualization is offered as two models: IBM TS7720 features encryption-capable high-capacity cache that uses 3 TB SAS disk drives with RAID 6, which can scale to large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 GB SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and earlier IBM 3592 model tape drives that are installed in IBM TS3500 tape libraries. Physical tape support is optional on TS7720. TS7700 R3.3 also supports external key management for disk-based encryption by using IBM Security Key Lifecycle Manager. This book intended for system architects who want to integrate their storage systems for smoother operation.

This IBM® Redbooks® publication highlights IBM TS7700 Virtualization Engine Release 3.2 (IBM TS7700). IBM TS7700 is part of a family of IBM System Storage® Enterprise tape products. This book is intended for system architects who want to integrate their storage systems for smoother operation. The IBM TS7700 offers a modular, scalable, and high-performing architecture for mainframe tape virtualization for the IBM System z® environment. It integrates IBM 3592 tape cartridges, high-performance disks, and a new disk cache subsystem into a storage hierarchy. This storage hierarchy is managed by robust storage management firmware with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Redundant copies, including across a grid network Copy mode control The IBM TS7700 Virtualization Engine offers enhanced statistical reporting. It also includes a standards-based Management Interface (MI) for IBM TS7700 management. The IBM TS7700 Release 3.2 continues the next generation of IBM TS7700 Virtualization Engine servers for System z tape: IBM TS7720 features encryption-capable, high-capacity cache using 3 terabyte (TB) serial-attached Small Computer System Interface (SAS) disk drives with Redundant Array of Independent Disks (RAID) 6, providing the ability to scale to very large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 gigabyte (GB) SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1140 and earlier IBM 3592 model tape drives installed in IBM TS3500 tape libraries. Physical tape support is optional on IBM TS7720. These Virtualization Engines are based on IBM POWER7® technology. They offer improved performance for most System z tape workloads compared to the first generation of IBM TS7700 Virtualization Engine servers. IBM TS7700 Virtualization Engine Release 3.2 builds on the existing capabilities of the IBM TS7700 family. It also includes the following enhancements to the IBM TS7700 family: 25 GB logical volume sizes Options for attaching back-end physical tape to IBM TS7720 systems Up to eight repository partitions in a tape-attached IBM TS7720

This IBM® Redbooks® publication highlights TS7700 Virtualization Engine Release 3.1. It is intended for system architects who want to integrate their storage systems for smoother operation. The IBM Virtualization Engine TS7700 offers a modular, scalable, and high-performing architecture for mainframe tape virtualization for the IBM System z® environment. It integrates 3592 Tape Drives, high-performance disks, and a new disk cache subsystem into a storage hierarchy. This storage hierarchy is managed by robust storage management firmware with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Redundant copies, including across a grid network Copy mode control The new IBM Virtualization Engine TS7700 Release 3.1 continues the next generation of TS7700 Virtualization Engine servers for System z tape: IBM Virtualization Engine TS7720 Server Model VEB with 3956-CS9 and 3-TB SAS drives with RAID 6 protection IBM Virtualization Engine TS7740 Server Model V07 with 3956-CC9 with 600-GB SAS drives with RAID 6 protection TS7700 Virtualization Engine Release 3.1 builds on the existing capabilities of the TS7700 family. It also introduces the following capabilities: 8-Gb IBM FICON® adapters for host attachment Up to eight FICON channel host attachments, doubling the previous number of channels available Up to 512 logical path definitions per FICON channel, doubling the previous number of logical paths per channel IBM FlashCopy® for disaster recovery testing Support for a second TS7720 expansion frame attached to a TS7720 system for a total TS7720 system capacity up to 1 PB before compression New Time Delayed Copy policy

This IBM® Redbooks® publication discusses the connectivity options available for use within and beyond the data center for the IBM System z® family of mainframes, which includes these systems: IBM zEnterprise® EC12 (zEC12) IBM zEnterprise BC12 (zBC12) IBM zEnterprise 196 (z196) IBM zEnterprise 114 (z114) IBM System z10® Enterprise Class (z10 EC) IBM System z10 Business Class (z10 BC) This book highlights the hardware and software components, functions, typical uses, coexistence, and relative merits of these connectivity features. It helps readers understand the connectivity alternatives that are available when planning and designing their data center infrastructures. The changes to this edition are based on the System z hardware announcement dated July 23, 2013. This book is intended for data center planners, IT professionals, systems engineers, technical sales staff, and network planners who are involved in the planning of connectivity solutions for IBM System z servers.

In a smarter planet, information-centric processes are exploding in growth. The mainframe has always been the IT industry's leading platform for transaction processing, consolidated and secure data serving, and support for available enterprise-wide applications. IBM® has extended the mainframe platform to help large enterprises reshape their client experiences through information-centric computing and to deliver on key business initiatives. IBM zEnterprise® is recognized as the most reliable and trusted system, and the most secure environment for core business operations. The new zEnterprise System consists of the IBM zEnterprise EC12 (zEC12) or IBM zEnterprise BC12 (zBC12), the IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise IBM BladeCenter® Extension (zBX) Model 003. This IBM Redbooks® publication describes the zEC12 and zBC12, with their improved scalability, performance, security, resiliency, availability, and virtualization. The zEnterprise System has no peer as a trusted platform that also provides the most efficient transaction processing and database management. With efficiency at scale delivering significant cost savings on core processes, resources can be freed up to focus on developing new services to drive growth. This book provides a technical overview of the zEC12, zBC12, zBX Model 003, and Unified Resource Manager. This publication is intended for IT managers, architects, consultants, and anyone else who wants to understand the elements of the zEnterprise System. For this introduction to the zEnterprise System, readers are not expected to be familiar with current IBM System z® technology and terminology.

The popularity of the Internet and the affordability of information technology (IT) hardware and software have resulted in an explosion dramatic increase in the number of applications, architectures, and platforms. Workloads have changed. Many applications, including mission-critical ones, are deployed on a variety of platforms, and the IBM® System z® design has adapted to this change. It takes into account a wide range of factors, including compatibility and investment protection, to match the IT requirements of an enterprise. This IBM Redbooks® publication provides information about the IBM zEnterprise® BC12 (zBC12), an IBM scalable mainframe server. IBM is taking a revolutionary approach by integrating separate platforms under the well-proven System z hardware management capabilities, while extending System z qualities of service to those platforms. The zEnterprise System consists of the zBC12 central processor complex, the IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise BladeCenter® Extension (zBX). The zBC12 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The zBC12 provides the following improvements over its predecessor, the IBM zEnterprise 114 (z114): Up to a 36% performance boost per core running at 4.2 GHz Up to 58% more capacity for traditional workloads Up to 62% more capacity for Linux workloads This book provides an overview of the zBC12 and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. This book is intended for systems engineers, consultants, planners, and anyone who wants to understand zEnterprise System functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM System z technology and terminology.

The popularity of the Internet and the affordability of IT hardware and software have resulted in an explosion of applications, architectures, and platforms. Workloads have changed. Many applications, including mission-critical ones, are deployed on various platforms, and the IBM® System z® design has adapted to this change. It takes into account a wide range of factors, including compatibility and investment protection, to match the IT requirements of an enterprise. This IBM Redbooks® publication addresses the new IBM zEnterprise® System. This system consists of the IBM zEnterprise EC12 (zEC12), an updated IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise BladeCenter® Extension (zBX) Model 003. The zEC12 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The superscalar design allows the zEC12 to deliver a record level of capacity over the prior System z servers. It is powered by 120 of the world's most powerful microprocessors. These microprocessors run at 5.5 GHz and are capable of running more than 75,000 millions of instructions per second (MIPS). The zEC12 Model HA1 is estimated to provide up to 50% more total system capacity than the IBM zEnterprise 196 (z196) Model M80. The zBX Model 003 infrastructure works with the zEC12 to enhance System z virtualization and management. It does so through an integrated hardware platform that spans mainframe, IBM POWER7®, and IBM System x® technologies. Through the Unified Resource Manager, the zEnterprise System is managed as a single pool of resources, integrating system and workload management across the environment. This book provides information about the zEnterprise System and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. It is intended for systems engineers, consultants, planners, and anyone who wants to understand the zEnterprise System functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM System z® technology and terminology.

This IBM® Redbooks® publication highlights TS7700 Virtualization Engine Release 3.0. It is intended for system architects who want to integrate their storage systems for smoother operation. The IBM Virtualization Engine TS7700 offers a modular, scalable, and high-performing architecture for mainframe tape virtualization for the IBM System z® environment. It integrates 3592 Tape Drives, high-performance disks, and a new disk cache subsystem into a storage hierarchy. This storage hierarchy is managed by robust storage management firmware with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Dual copy, including across a grid network Copy mode control The TS7700 Virtualization Engine offers enhanced statistical reporting. It also includes a standards-based management interface for TS7700 Virtualization Engine management. The new IBM Virtualization Engine TS7700 Release 3.0 continues the next generation of TS7700 Virtualization Engine servers for System z tape: IBM Virtualization Engine TS7720 Server Model VEB with 3956-CS9 and 3 TB disk drive modules (DDMs) IBM Virtualization Engine TS7740 Server Model V07 with 3956-CC9 with 600 GB DDMs These Virtualization Engines are based on IBM POWER7® technology. They offer improved performance for most System z tape workloads compared to the first generation of TS7700 Virtualization Engine servers. TS7700 Virtualization Engine Release 3.0 builds on the existing capabilities of the TS7700 family. It also introduces the following capabilities: Up to 4,000,000 logical volumes per grid domain Disk cache refresh utilizing 3956-CC9 for TS7740 Model V07 and 3956-CS9 for TS7720 Model VEB Virtualization Engines IPv4 or IPv6 support for customer network and IP Security for grid communication

The popularity of the Internet and the affordability of IT hardware and software have resulted in an explosion of applications, architectures, and platforms. Workloads have changed. Many applications, including mission-critical ones, are deployed on a variety of platforms, and the System z® design has adapted to this change. It takes into account a wide range of factors, including compatibility and investment protection, to match the IT requirements of an enterprise. The zEnterprise System consists of the IBM zEnterprise 196 central processor complex, the IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise BladeCenter® Extension. The z196 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The z196 Model M80 provides up to 1.6 times the total system capacity of the z10™ EC Model E64, and all z196 models provide up to twice the available memory of the z10 EC. The zBX infrastructure works with the z196 to enhance System z virtualization and management through an integrated hardware platform that spans mainframe, POWER7™, and System x® technologies. Through the Unified Resource Manager, the zEnterprise System is managed as a single pool of resources, integrating system and workload management across the environment. This IBM® Redbooks® publication provides an overview of the zEnterprise System and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. This book is intended for systems engineers, consultants, planners, and anyone wanting to understand the zEnterprise System functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM System z technology and terminology. The changes to this edition are based on the System z hardware announcement dated July 12, 2011.

The popularity of the Internet and the affordability of IT hardware and software have resulted in an explosion of applications, architectures, and platforms. Workloads have changed. Many applications, including mission-critical ones, are deployed on a variety of platforms, and the System z® design has adapted to this change. It takes into account a wide range of factors, including compatibility and investment protection, to match the IT requirements of an enterprise. This IBM® Redbooks® publication discusses the IBM zEnterprise System, an IBM scalable mainframe server. IBM is taking a revolutionary approach by integrating separate platforms under the well-proven System z hardware management capabilities, while extending System z qualities of service to those platforms. The zEnterprise System consists of the IBM zEnterprise 114 central processor complex, the IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise BladeCenter® Extension. The z114 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The z114 provides up to 18% improvement in uniprocessor speed and up to a 12% increase in total system capacity for z/OS®, z/VM®, and Linux on System z over the z10™ Business Class (BC). The zBX infrastructure works with the z114 to enhance System z virtualization and management through an integrated hardware platform that spans mainframe, POWER7™, and System x technologies. The federated capacity from multiple architectures of the zEnterprise System is managed as a single pool of resources, integrating system and workload management across the environment through the Unified Resource Manager. This book provides an overview of the zEnterprise System and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. This book is intended for systems engineers, consultants, planners, and anyone wanting to understand the zEnterprise System functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM System z technology and terminology.

Recently, the IT industry has seen an explosion in applications, architectures, and platforms. With the generalized availability of the internet and the appearance of commodity hardware and software, several patterns have emerged that have gained center stage. Workloads have changed. Many applications, including mission-critical ones, are deployed in heterogeneous infrastructures. System z® design has adapted to this change. IBM® has a holistic approach to System z design, which includes hardware, software, and procedures. It takes into account a wide range of factors, including compatibility and investment protection, which ensures a tighter fit with IT requirements of an enterprise. This IBM Redbooks® publication introduces the revolutionary scalable IBM zEnterprise System, which consists of the IBM zEnterprise 196 (z196) or the IBM zEnterprise 114 (z114), the IBM zEnterprise BladeCenter® Extension (zBX), and the IBM zEnterprise Unified Resource Manager. IBM is taking a bold step by integrating heterogeneous platforms under the proven System z hardware management capabilities, while extending System z qualities of service to those platforms. The z196 and z114 are general-purpose servers that are equally at ease with compute-intensive workloads and with I/O-intensive workloads. The integration of heterogeneous platforms is based on IBM BladeCenter technology, allowing improvements in price and performance for key workloads, while enabling a new range of heterogeneous platform solutions. The z196 and z114 are at the core of the enhanced System z platforms, which are designed to deliver technologies that businesses need today along with a foundation to drive future business growth. The changes to this edition are based on the System z hardware announcement dated July 12, 2011. This book provides basic information about z196, z114, zBX, and Unified Resource Manager capabilities, hardware functions and features, and associated software support. It is intended for IT managers, architects, consultants, and anyone else who wants to understand the elements of the zEnterprise System. For this introduction to the zEnterprise System, readers are not expected to be familiar with current IBM System z technology and terminology.