The IBM® System Storage® Solutions Handbook helps you solve your current and future data storage business requirements. It helps you achieve enhanced storage efficiency by design to allow managed cost, capacity of growth, greater mobility, and stronger control over storage performance and management. It describes the most current IBM storage products, including the IBM Spectrum™ family, IBM FlashSystem®, disk, and tape, as well as virtualized solutions such IBM Storage Cloud. This IBM Redbooks® publication provides overviews and information about the most current IBM System Storage products. It shows how IBM delivers the right mix of products for nearly every aspect of business continuance and business efficiency. IBM storage products can help you store, safeguard, retrieve, and share your data. This book is intended as a reference for basic and comprehensive information about the IBM Storage products portfolio. It provides a starting point for establishing your own enterprise storage environment. This book describes the IBM Storage products as of March, 2016.

This IBM® Redbooks® publication helps administrators and technical professionals understand Internet Small Computer System Interface (iSCSI) and how to implement it for use with IBM Storwize® storage systems. iSCSI can be used alone or with other technologies. This publication provides an overview of the iSCSI protocol and helps you understand how it is similar to and different from Fibre Channel (FC) technology. It helps you plan and design your network topology. It explains how to configure your IBM Storwize storage systems and hosts (including IBM AIX®, Linux, VMware, and Microsoft Windows hosts) to interact with it. It also provides an overview of using IBM Storwize storage systems with OpenStack. This book describes iSCSI configuring for IBM Storwize and SAN Volume Controller storage systems at Version 7.6 or later. In addition to configuration, this publication provides information about performance and troubleshooting.

This IBM® Redbooks® publication addresses topics to help answer customers' complex high availability requirements to help maximize systems availability and resources, and provide documentation to transfer the how-to-skills to the worldwide sales and support teams. This publication helps strengthen the position of the IBM PowerHA® SystemMirror® solution with a well-defined and documented deployment models within an IBM Power Systems™ virtualized environment, providing customers a planned foundation for business resilient infrastructure solutions. This book describes documentation, and other resources available to help the technical teams provide business resilience solutions and support with the IBM PowerHA SystemMirror Standard and Enterprise Editions on IBM Power Systems. This publication targets technical professionals (consultants, technical support staff, IT Architects, and IT Specialists) responsible for providing high availability solutions and support with IBM PowerHA SystemMirror Standard and Enterprise Editions on IBM Power Systems.

This IBM® Redbooks® publication gives a broad explanation of the kernel-based virtual machine (KVM) for IBM z Systems™ (KVM for IBM z Systems) and how it uses the architecture of IBM z Systems platforms. It focuses on the planning of the environment and provides installation and configuration definitions that are necessary to build and manage KVM for IBM z Systems. This publication is useful to IT architects and system administrators who plan for and install KVM for IBM z Systems. The reader is expected to have a good understanding of IBM z Systems hardware, KVM for IBM z Systems, Linux on z Systems, and virtualization concepts.

This IBM® Redbooks® publication presents the architecture, design, concepts, and technology that are used in IBM FlashSystem® A9000 and IBM FlashSystem A9000R. FlashSystem A9000 and FlashSystem A9000R deliver the microsecond latency and high availability of IBM FlashCore™ technology with grid architecture, simple scalability, and industry-leading IBM software that is designed to drive your business into the cognitive era. Comprehensive data reduction capabilities, including inline deduplication and a new compression engine, help lower total cost of ownership, while a new, highly intuitive user interface simplifies management. FlashSystem A9000 and FlashSystem A9000R transform technology infrastructure into business innovation. From a functional standpoint, FlashSystem A9000 and FlashSystem A9000R take advantage of most of the software-defined storage features that are offered by the IBM Spectrum™ Accelerate software, including multi-tenancy and business continuity functions. This book contains numerous illustrations about how to manage and configure the storage system, by using the new user interface. This publication is intended for those individuals who need to plan, install, tailor, and configure FlashSystem A9000 and FlashSystem A9000R.

This IBM® Redbooks® publication is a detailed technical guide to the IBM System Storage® SAN Volume Controller (SVC), powered by IBM Spectrum Virtualize™ Version 7.6. IBM SAN Volume Controller is a virtualization appliance solution, which maps virtualized volumes that are visible to hosts and applications to physical volumes on storage devices. Each server within the storage area network (SAN) has its own set of virtual storage addresses that are mapped to physical addresses. If the physical addresses change, the server continues running by using the same virtual addresses that it had before. Therefore, volumes or storage can be added or moved while the server is still running. The IBM virtualization technology improves the management of information at the "block" level in a network, which enables applications and servers to share storage devices on a network.

Digital business has been driving the transformation of underlying information technology (IT) infrastructure to be more efficient, secure, adaptive, and integrated. IT must be able to handle the explosive growth of mobile clients and employees. It also must be able to process enormous amounts of data to provide deep and real-time insights to help achieve the greatest business impact. This IBM® Redbooks® publication addresses the new IBM z Systems™ single frame, the IBM z13s server. IBM z Systems servers are the trusted enterprise platform for integrating data, transactions, and insight. A data-centric infrastructure must always be available with a 99.999% or better availability, have flawless data integrity, and be secured from misuse. It needs to be an integrated infrastructure that can support new applications. It also needs to have integrated capabilities that can provide new mobile capabilities with real-time analytics delivered by a secure cloud infrastructure. IBM z13s servers are designed with improved scalability, performance, security, resiliency, availability, and virtualization. The superscalar design allows z13s servers to deliver a record level of capacity over the prior single frame z Systems server. In its maximum configuration, the z13s server is powered by up to 20 client characterizable microprocessors (cores) running at 4.3 GHz. This configuration can run more than 18,000 millions of instructions per second (MIPS) and up to 4 TB of client memory. The IBM z13s Model N20 is estimated to provide up to 100% more total system capacity than the IBM zEnterprise® BC12 Model H13. This book provides information about the IBM z13s server and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. It is intended for systems engineers, consultants, planners, and anyone who wants to understand the IBM z Systems™ functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM z Systems technology and terminology.

This IBM® Redbooks® publication provides best practice guidance for planning, installing, configuring, and employing the IBM TS7600 ProtecTIER® family of products. It provides the latest best practices for the practical application of ProtecTIER Software Version 3.4. This latest release introduces the new ProtecTIER Enterprise Edition TS7650G DD6 model high performance server. This book also includes information about the revolutionary and patented IBM HyperFactor® deduplication engine, along with other data storage efficiency techniques, such as compression and defragmentation. The IBM System Storage® TS7650G ProtecTIER Deduplication Gateway and the IBM System Storage TS7620 ProtecTIER Deduplication Appliance Express are disk-based data storage systems: The Virtual Tape Library (VTL) interface is the foundation of ProtecTIER and emulates traditional automated tape libraries. For your existing ProtecTIER solution, this guide provides best practices and suggestions to boost the performance and the effectiveness of data deduplication with regards to your application platforms for your VTL and FSI (systems prior to version 3.4). When you build a ProtecTIER data deduplication environment, this guide can help IT architects and solution designers plan for the best option and scenario for data deduplication for their environments. This book can help you optimize your deduplication ratio, while reducing the hardware, power and cooling, and management costs. This Redbooks publication provides expertise that was gained from an IBM ProtecTIER System Client Technical Specialist (CTS), Development, and Quality Assurance teams. This planning should be done by the Sales Representative or IBM Business Partner, with the help of an IBM System CTS or IBM Solution Architect.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster-recovery (DR) solution for business applications that run in an IBM i environment. With PowerHA for i, you can support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication helps you to install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM System Storage® DS8000 series. This publication provides you with planning information to prepare to use the various PowerHA offerings for the IBM DS8000 family. It also provides implementation and management information. It provides guidance about troubleshooting these solutions and identifies the documentation and data that you need to capture before you call IBM Support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i that uses native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation, SG24-8400 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402 IBM PowerHA SystemMirror for i: Using Geographic Mirroring, SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster recovery (DR) solution for business applications running in an IBM i environment. You can use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. Use this IBM Redbooks® publication to help you install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM Storwize storage servers. This publication provides you with planning information to prepare for using the various PowerHA offerings for the IBM Storwize storage family. It also provides implementation and managing information. Finally, it provides guidance on troubleshooting these solutions and identifies the documentation that you must capture before calling support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i by using native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400 IBM PowerHA SystemMirror for i: Using DS8000 (Volume 2 of 4), SG24-8403 IBM PowerHA SystemMirror for i: Using Geographic Mirroring (Volume 4 of 4), SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, you should first review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

This IBM® Redbooks® publication addresses topics to use the virtualization strengths of the IBM POWER8® platform to solve clients' system resource utilization challenges and maximize systems' throughput and capacity. This book addresses performance tuning topics that will help answer clients' complex analytic workload requirements, help maximize systems' resources, and provide expert-level documentation to transfer the how-to-skills to the worldwide teams. This book strengthens the position of IBM Analytics and Big Data solutions with a well-defined and documented deployment model within a POWER8 virtualized environment, offering clients a planned foundation for security, scaling, capacity, resilience, and optimization for analytics workloads. This book is targeted toward technical professionals (analytics consultants, technical support staff, IT Architects, and IT Specialists) who are responsible for providing analytics solutions and support on IBM Power Systems™.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster-recovery (DR) solution for business applications that are running in an IBM i environment. Use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication helps you to install, tailor, and configure IBM PowerHA SystemMirror for i to use with geographic mirroring and native storage. This publication provides you with planning information to prepare to use the various PowerHA offerings with geographic mirroring with IBM i native storage. It also provides implementation and management information. It provides guidance about troubleshooting these solutions and identifies the documentation that you need to capture before you call IBM Support. This book is part of a four-book set that gives you a complete understanding of PowerHA for i with native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation, SG24-8400 IBM PowerHA SystemMirror for i: Using DS8000, SG24-8403 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, you need to first review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to obtain a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

Digital business has been driving the transformation of underlying IT infrastructure to be more efficient, secure, adaptive, and integrated. Information Technology (IT) must be able to handle the explosive growth of mobile clients and employees. IT also must be able to use enormous amounts of data to provide deep and real-time insights to help achieve the greatest business impact. This IBM® Redbooks® publication addresses the IBM Mainframe, the IBM z13™. The IBM z13 is the trusted enterprise platform for integrating data, transactions, and insight. A data-centric infrastructure must always be available with a 99.999% or better availability, have flawless data integrity, and be secured from misuse. It needs to be an integrated infrastructure that can support new applications. It needs to have integrated capabilities that can provide new mobile capabilities with real-time analytics delivered by a secure cloud infrastructure. IBM z13 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The superscalar design allows the z13 to deliver a record level of capacity over the prior IBM z Systems™. In its maximum configuration, z13 is powered by up to 141 client characterizable microprocessors (cores) running at 5 GHz. This configuration can run more than 110,000 millions of instructions per second (MIPS) and up to 10 TB of client memory. The IBM z13 Model NE1 is estimated to provide up to 40% more total system capacity than the IBM zEnterprise® EC12 (zEC1) Model HA1. This book provides information about the IBM z13 and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. It is intended for systems engineers, consultants, planners, and anyone who wants to understand the IBM z Systems functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM z Systems technology and terminology.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, it delivers a complete HA and disaster-recovery (DR) solution for business applications that are running in an IBM i environment. You can use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication gives a broad understanding of PowerHA for i and provides a general introduction to clustering technology, independent auxiliary storage pools (IASPs), PowerHA SystemMirror products, and the PowerHA architecture. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i and its use of native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Using DS8000, SG24-8403 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402. IBM PowerHA SystemMirror for i: Using Geographic Mirroring, SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, first review the information that is presented in this book to get a general understanding of clustering technology, IASPs, and the PowerHA architecture. You can then select the appropriate follow-on book based on the storage solutions that you are planning to use.

IBM® TS7700 is a family of mainframe virtual tape solutions that optimize data protection and business continuance for IBM z Systems™ data. Through the use of virtualization and disk cache, the TS7700 family operates at disk speeds while maintaining compatibility with existing tape operations. Its fully integrated tiered storage hierarchy takes advantage of both disk and tape technologies to deliver performance for active data and best economics for inactive and archive data. This IBM Redbooks® publication describes the TS7700 R3.3 architecture, planning, migration, implementation, and operations. The latest TS7700 family of z Systems tape virtualization is offered as two models: IBM TS7720 features encryption-capable high-capacity cache that uses 3 TB SAS disk drives with RAID 6, which can scale to large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 GB SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and earlier IBM 3592 model tape drives that are installed in IBM TS3500 tape libraries. Physical tape support is optional on TS7720. TS7700 R3.3 also supports external key management for disk-based encryption by using IBM Security Key Lifecycle Manager. This book intended for system architects who want to integrate their storage systems for smoother operation.

The IBM® Hardware Management Console (HMC) provides to systems administrators a tool for planning, deploying, and managing IBM Power Systems™ servers. This IBM Redbooks® publication is an extension of IBM Power Systems HMC Implementation and Usage Guide, SG24-7491 and also merges updated information from IBM Power Systems Hardware Management Console: Version 8 Release 8.1.0 Enhancements, SG24-8232. It explains the new features of IBM Power Systems Hardware Management Console Version V8.8.1.0 through V8.8.4.0. The major functions that the HMC provides are Power Systems server hardware management and virtualization (partition) management. Further information about virtualization management is in the following publications: IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 IBM PowerVM Enhancements What is New in 2013, SG24-8198 IBM Power Systems SR-IOV: Technical Overview and Introduction, REDP-5065 The following features of HMC V8.8.1.0 through HMC V8.8.4.0 are described in this book: HMC V8.8.1.0 enhancements HMC V8.8.4.0 enhancements System and Partition Templates HMC and IBM PowerVM® Simplification Enhancement Manage Partition Enhancement Performance and Capacity Monitoring HMC V8.8.4.0 upgrade changes

Procedures, triggers, and user-defined functions (UDFs) are the key database software features for developing robust and distributed applications. IBM Universal Database™ for i (IBM DB2® for i) supported these features for many years, and they were enhanced in V5R1, V5R2, and V5R3 of IBM® OS/400® and V5R4 of IBM i5/OS™. This IBM Redbooks® publication includes several of the announced features for procedures, triggers, and UDFs in V5R1, V5R2, V5R3, and V5R4. This book includes suggestions, guidelines, and practical examples to help you effectively develop IBM DB2 for i procedures, triggers, and UDFs. The following topics are covered in this book: External stored procedures and triggers Java procedures (both Java Database Connectivity (JDBC) and Structured Query Language for Java (SQLJ)) External triggers External UDFs This publication also offers examples that were developed in several programming languages, including RPG, COBOL, C, Java, and Visual Basic, by using native and SQL data access interfaces. This book is part of the original IBM Redbooks publication, Stored Procedures, Triggers, and User-Defined Functions on DB2 Universal Database for iSeries, SG24-6503-02, that covered external procedures, triggers, and functions, and also SQL procedures, triggers, and functions. All of the information that relates to external routines was left in this publication. All of the information that relates to SQL routines was rewritten and updated. This information is in the new IBM Redbooks publication, SQL Procedures, Triggers, and Functions on IBM DB2 for i, SG24-8326. This book is intended for anyone who wants to develop IBM DB2 for i procedures, triggers, and UDFs. Before you read this book, you need to know about relational database technology and the application development environment on the IBM i server.

Structured Query Language (SQL) procedures, triggers, and functions, which are also known as user-defined functions (UDFs), are the key database features for developing robust and distributed applications. IBM® DB2® for i supported these features for many years, and they are enhanced in IBM i versions 6.1, 7.1, and 7.2. DB2 for i refers to the IBM DB2 family member and relational database management system that is integrated within the IBM Power operating system that is known as IBM i. This IBM Redbooks® publication includes several of the announced features for SQL procedures, triggers, and functions in IBM i versions 6.1, 7.1, and 7.2. This book includes suggestions, guidelines, and practical examples to develop DB2 for i SQL procedures, triggers, and functions effectively. This book covers the following topics: Introduction to the SQL/Persistent Stored Modules (PSM) language, which is used in SQL procedures, triggers, and functions SQL procedures SQL triggers SQL functions This book is for IBM i database engineers and data-centric developers who strive to provide flexible, extensible, agile, and scalable database solutions that meet business requirements in a timely manner. Before you read this book, you need to know about relational database technology and the application development environment on the IBM Power Systems™ with the IBM i operating system.

This IBM® Redbooks® publication provides guidance about how to configure, monitor, and manage your IBM DS8880 storage systems to achieve optimum performance, and it also covers the IBM DS8870 storage system. It describes the DS8880 performance features and characteristics, including hardware-related performance features, synergy items for certain operating systems, and other functions, such as IBM Easy Tier® and the DS8000® I/O Priority Manager. The book also describes specific performance considerations that apply to particular host environments, including database applications. This book also outlines the various tools that are available for monitoring and measuring I/O performance for different server environments, and it describes how to monitor the performance of the entire DS8000 storage system. This book is intended for individuals who want to maximize the performance of their DS8880 and DS8870 storage systems and investigate the planning and monitoring tools that are available. The IBM DS8880 storage system features, as described in this book, are available for the DS8880 model family with R8.0 release bundles (Licensed Machine Code (LMC) level 7.8.0).

This IBM® Redbooks® publication introduces the IBM Reference Architecture for Genomics, IBM Power Systems™ edition on IBM POWER8®. It addresses topics such as why you would implement Life Sciences workloads on IBM POWER8, and shows how to use such solution to run Life Sciences workloads using IBM Platform™ Computing software to help set up the workloads. It also provides technical content to introduce the IBM POWER8 clustered solution for Life Sciences workloads. This book customizes and tests Life Sciences workloads with a combination of an IBM Platform Computing software solution stack, Open Stack, and third party applications. All of these applications use IBM POWER8, and IBM Spectrum Scale™ for a high performance file system. This book helps strengthen IBM Life Sciences solutions on IBM POWER8 with a well-defined and documented deployment model within an IBM Platform Computing and an IBM POWER8 clustered environment. This system provides clients in need of a modular, cost-effective, and robust solution with a planned foundation for future growth. This book highlights IBM POWER8 as a flexible infrastructure for clients looking to deploy life sciences workloads, and at the same time reduce capital expenditures, operational expenditures, and optimization of resources. This book helps answer clients' workload challenges in particular with Life Sciences applications, and provides expert-level documentation and how-to-skills to worldwide teams that provide Life Sciences solutions and support to give a broad understanding of a new architecture.